Looking for a pair of sound front road springs, sound radiator (just the core/tanks - I have the shell), bare track rod, starter motor spacer ring, the rear cam bearing cover and two SV Minor brake cam levers. Can anyone help?
Thanks,
Ian
Parts wanted for my McEvoy
Moderators: Ian Grace, Will Grace
-
- Posts: 8
- Joined: Thu Jun 16, 2011 10:47 am
Re: Parts wanted for my McEvoy
Ian, did you get the SV cam cover, I'm sure I posted that I have this?
Mike
michael.p.rose@btinternet.com
Mike
michael.p.rose@btinternet.com
Re: Parts wanted for my McEvoy
Hi Mike,
No, I am still in need of the rear cam bearing cover. is that what you have? Its the small triangular pressed steel plate, not the tappet cover.
No, I am still in need of the rear cam bearing cover. is that what you have? Its the small triangular pressed steel plate, not the tappet cover.
Re: Parts wanted for my McEvoy
Ian,
There is an 1.25" downdraft SU on ebay from Fairorgan.
Do you still need the triangular camshaft cover ?
There is an 1.25" downdraft SU on ebay from Fairorgan.
Do you still need the triangular camshaft cover ?
Re: Parts wanted for my McEvoy
Thanks Simon. Yes I do need the cam bearing cover.
Ian
Ian
Re: Parts wanted for my McEvoy
Most of these parts found now, but still looking for a bare track rod. Mike is corroded and bent and doesn't look too safe!
Also looking for a replacement SV cylinder head - the later one-piece type.
I have a Derrington 3-speed remote but the McEvoy box is 4-speed. Does anyone have a 4-speed remote that they are willing to swap for a 3-speed?
Has anyone had any SV Minor fuel tank straps made? Mine are definitely second-hand!
Also looking for a replacement SV cylinder head - the later one-piece type.
I have a Derrington 3-speed remote but the McEvoy box is 4-speed. Does anyone have a 4-speed remote that they are willing to swap for a 3-speed?
Has anyone had any SV Minor fuel tank straps made? Mine are definitely second-hand!